Dice Tray with Storage Vault
Description
A sleek low-profile dice tray with a hinged lid that doubles as a storage vault for your dice set. Soft-touch PLA interior, rigid PETG exterior frame. Fits a standard 7-piece polyhedral dice set. The lid snaps shut securely — no more lost dice.
Material
Eco-friendly, ideal for most prints. Best value.
Quantity
PLA · 1 pc · Ships in 3–5 days
More Products
Raspberry Pi 7" Touchscreen Case
A flush wall-mount enclosure for a Raspberry Pi 4 Model B behind the official 7" touch display. 198.6 x 116.4 x 43mm, printed as a single piece with a slim rear shell, ventilation slots, a keyhole hanger and cable exits at the bottom. Mounts to the display's own driver-board standoffs; assembles with four M3x35 screws from the back. Designed to the official LCD and Pi 4 drawings, mesh-validated print-ready with zero non-manifold geometry.
Mahjong Scalloped Tile Rack
An American-style two-tier mahjong rack, 475 x 81 x 38mm, with a lower ledge and a raised shelf over a hollow channel. Fifteen round scallops along the back wall, 4mm slabs throughout, and recesses for 6x2mm magnets in the shelf. Drawn from a traditional acrylic slab rack and rebuilt parametrically.
Tree of Life Hex Panel
A tree of life fragmented across 15 hexagon tiles — a symmetric goblet canopy with leaf accents and mirrored curling roots. Each tile is a separate cut-through print hung on a single wall pin, and prints flat with no supports. Every tile is manifold with an exact sharp hexagon frame, a built-in mount hole, and a 1.2mm minimum feature so the finest twigs still print. 811 x 749mm assembled (32 x 29in); each tile 152mm flat-to-flat, 4mm thick.